Looking for the best 3.5 Ton Floor Jacks, you came to the right place.
3.5-ton floor jacks are made for a wide range of vehicles such as cars and vans and can be used for repair and maintenance operations and cleaning purposes among other uses.
3.5-ton jacks can comfortably support the weight of cars in this weight category and ensure that the lift is safe by balancing and distributing the weight and pressure exerted on the jack to the floor.
Best 3.5 Ton Floor Jacks-Top Picks
#1) Blackhawk B6350 Black/Red Fast Lift Service Jack – 3.5 Ton Capacity
|
#2) Pro-LifT G-737 Grey Speedy Lift Garage Jack – 3-1/2 Ton Capacity
|
#3) Pro-Lift T-9635 Grey High Lift Jack Stand – 3.5 Ton Capacity
Check Price on Amazon
This Pro-lift T-9635 high-lift jack stand is a high-performance jack made from a sturdy and stamped steel material that gives it unrivaled strength and durability. Its parts are also made of high-quality reinforced material such as the high-quality ratchet bar that features strong cast ductile iron that is highly resistant to breakages even after the prolonged use of the lift jack stand. The strength of the T-9635 lift jack stand makes it ideal lifting equipment for farm and workshop use on auto and truck services. For maximum efficiency, this lift jack stand features a height adjustment mechanism that allows smooth upward movement enabling the operator to have a considerable level of control over the lifting and release process. The release handle is also crucial in guaranteeing the safety of the whole lift and release process and it easily locks into position for safety and stability purposes. The safety and security of the T-9635 are evident and it meets and surpasses the ANSI/PALD standards. Features
Bottom line: Construction of the highest quality makes the Pro-lift T9635 jack stand so special since the jack will guarantee the stability and safety of the operator and the load being lifted without compromise. An easy control system that allows for an easy lift and release process only adds to the efficiency of the functional process of the T9635 lift jack. Its Grey color scheme finish allows the jack stand to operate on dusty areas without the dirt standing out as the color scheme allows it to camouflage and is easy to clean thereafter. |
#4) Sunex Tools 66035SJ 3.5 Ton Low Profile Steel Service Jack with Rapid Rise Technology
Check Price on Amazon
The Sunex 66035SJ low-profile service jack has a specialized construction design with compartments for various roles that contribute to the efficiency of the jack. A high-performance power unit with upgraded seals and hydraulic fluids supplies the lift jack with the power to make an instant lift. The 66035SJ has arguably the most efficient rapid rise technology enabled by dual pump pistons that allow the jack saddle to quickly raise the load. A low-profile design with long reach frames enables the operator to access hard-to-reach lift points on the underbelly of the car. The caster wheels in this lift jack are huge enough for easier and faster movement with the rear swivel casters being fitted with ball bearings that increase their ability to make instant turns and extreme mobility capabilities. The flexibility in the performance of the Sunex 66035SJ service jack is highlighted by its long lifting range beginning from an extremely low height of 3.85 inches to a maximum high of 21.2 inches. This ensures that the jack can be placed under most cars even those with extra-low clarity and with the car hoisted at maximum height, the mechanic or car owner can comfortably operate on the underside of the car with a full view. Features
Bottom line: The Sunex 66035SJ has strived to include all the features of a high-performance lift jack into one. From the low profile that makes the jack fit under cars with extra-low clearance, the high maximum lift height of 21.2 inches that allows the user to have a complete view of the underside of their car to the high-performance power unit with quality seals and dual pumps, safety, strength, and speed are all elements that can be found within this jack lift. Car owners, mechanics, and workshop operators can never go wrong with the Sunex 66035SJ service jack with rapid-rise technology. |
Considerations When Buying the Best 3.5 Ton Floor Jacks
While the scope of this buying guide is to help you find the best 3.5 Ton floor jacks, buying a good fit can be quite frustrating for a first-time buyer. To land the best floor jack here are some of the things to consider:
- Price
Setting a budget helps prevent unnecessary purchases. Like other items in the market, 3.5-Ton floor jacks have different prices depending on the model and other price-determining parameters.
Before you start looking for a floor jack, you need to know how much you have at your disposal and narrow down your search as per your wallet. Ensure you have enough money to buy a top-quality floor jack that will serve you for many years.
- Car Model and Specification
Cars vary when it comes to height, gross weight, and jacking points. Knowing these particulars is important when buying floor jacks. At the end of the day, you need a jack that supports the weight of your vehicle comfortably, goes underneath your car effortlessly and has a lifting capacity to raise the car.
Read your car manual to know the exact measurements. Ground clearance varies from one vehicle to the other and so will the type of jacks needed for lifting purposes.
- Lifting Height Consideration
The clearance height of a vehicle is an important consideration when buying a floor jack. An ideal floor jack should lift the car to an ideal height to allow you to get beneath it and fix it. The lifting height for most floor jacks ranges from 3 inches to 20 inches. However, for cars with super low clearance, floor jacks with higher clearance would be required.
- Material and Weight Factor
A top-quality floor jack should have rugged construction with a resilient design to put up with the entire load of the vehicle for many years. Most floor jacks are made of cast iron due to their assured strength. Cast iron is heavy so portability is a problem. If you want an easily portable floor jack, look for one made of aluminum.
Aluminum-made floor jacks have a lightweight yet robust design. The other consideration is the finish. Ensure you get a floor jack with a quality finish. Read what other people are saying about the floor jack in the review section to get the best fit.
- Lifting Speed to Maximum Height
Lifting speed is calculated from the number of pumps required to reach full height. This factor shouldn’t be underestimated as it determines how quickly you fix your car. If you are looking for a floor jack to use when racing, you will need a jack with a higher lifting speed to help with the speedy fixing of your racing car.
- Platform Size
This is another important feature to look out for when buying the best 3.5-ton floor jacks. The size of the platform determines the stability of the machine’s operation. The larger the platform size the more stability.
FAQs About the Best 3.5 Ton Floor Jacks
What ton floor jack do I need?
The gross weight varies from one vehicle to the other. A 2-Ton floor jack is good enough for a regular car. However, to ensure you get the best lifting of your car you should have a floor jack that is rated at least ¾ of a vehicle’s total weight. For instance, if your car weighs 4,000 pounds, the floor jack should be rated 1.5 tons which is equivalent to 3000 pounds. As a general rule, you are advised not to operate floor jacks at the absolute limit of their ability.
Are Pittsburgh floor jacks any good?
Pittsburgh automotive floor jacks are reputable and very sturdy. As a matter of fact, floor jacks are highly dependable. The Pittsburg 3-Ton Heavy-Duty Low-Profile Floor jack for example incorporates the rapid pump technology so the lifting of automotive is quick. Besides, it is fitted with safety features making it one of the most coveted jacks for use in garages and workshops.
Are Arcan Floor jacks any good?
Arcan floor jacks are absolutely worth the money. They are heavy-duty, long-lasting, and lightweight. Additionally, these floor jacks are reasonably priced and their lifting capabilities are impressive. Let’s talk of the Arcan 3-Ton Heavy-Duty Low-Profile Floor Jack; it is respected in workshops and garages because of its excellent strength. It even lifts vehicles weighing 3 tons. This is super great.
Can a 3-ton jack lift an SUV?
Lifting an SUV requires a quality floor jack. A normal standard floor jack might not get the job done because SUVs are heavier than usual cars. Lifting an SUV requires a powerful jack to ensure safety, the last thing you need is damage to your vehicle arising from jack incompetency. If you can acquire a floor jack with an optimal lifting capacity of3 tons, you will comfortably raise your SUV properly.
Conclusion
The reviews above for the best 3.5 ton floor jacks should guide any potential buyer on the specifications whether for a lowered car or a higher car.
Cars within the 3.5-ton bracket are generally larger and could be either personal or commercial such as delivery vans.
The floor jacks can also be in the farms for lifting farm vehicles or heavy equipment and machinery and can also be used in the workshops for use where there are regular maintenance and repair services.
See Also: Best Low Profile Floor Jacks